Description

5PCS nFEPPFA Film for Resin 3D Printer

Compatible Models:

200x140x0.127mm: For Mars, Mars Pro, Mars 2, Mars 2 Pro,Mars 3, Mars 3 Pro, Photon S, Photon Mono, Photon Mono SE

260x200x0.127mm: For Saturn, Saturn S, Photon Mono X, Photon Mono X 6K, M3, M3 Plus, Sonic Mighty 4K, Sonic Mini 8K

320x220x0.127mm: For Saturn 2, Saturn 8K, Photon M3 Premium, Sonic Might 8K

380x260x0.127mm: for Elegoo juipter and Photon M3 Max

Installation steps

1.Remove screws to detach the steel rings from the resin vat.

2.Remove the screws to seperate the steel rings and change the nFEP film.

3.Put the new nFEP film in-between the two steel rings and install those screws back. You may need to force the screw in.

4. Install the steel rings back to the resin vat and ensure the nFEP film is clean and tensioned properly.

Note: please remove the protective film on both sides of the nFEP before use.