Description
DT9205 Protection Digital Multimeter Ammeter Current Capacitance Tester
Specifications:
Range:
ACV AC voltage: 200mV, 2V, 20V, 200V, 750V
DCV DC voltage: 200mV, 2V, 20V, 200V, 1000V
ACA AC current: 2mA, 20mA, 200mA, 20A
DCA DC current:20uA, 200uA, 2mA, 20mA, 200mA, 20A
Resistance:200Ω, 2kΩ, 20kΩ, 200kΩ, 2MΩ, 20MΩ, 200MΩ, 2000MΩ
Capacitors: 2nF, 20nF, 200nF, 2uF, 20uF, 200uF
Power supply: 9V, 6F22
Maximum display:1999
Features:
Test of crystal pole tube
Diode Testing
Turn-on buzzer
Not Automatic shutdown
CMOS integrated circuits, dual integration principle A / D conversion, automatic zero calibration, automatic polarity selection, overrange instructions.
LCD screen with high contrast 70 x 40mm/2.76 x 1.57large screen, the word up to 25mm/0.98. Depending on the viewing position, the display screen has a viewing angle of about 70 ° to achieve the best viewing effect.
Attentions:
The multimeter is the precision electronic instruments, do not arbitrarily change the internal circuit to avoid damage.
1.Do not receive more than 1000V DC or RMS 750V AC above the voltage up.
2.Do not accidentally take the range to avoid damage to the external circuit.
3.Using it after the instrument cover well
4.Turning off the power before you replace the battery and fuse to be in the pen. Unscrew the rear cover screw, gently lift the back cover slightly and push the cover forward, so that the cover on the back cover is removed from the instrum
ent case. Replace the battery and fuse according to the specifications on the back cover.
1 X DT9205 Digital Multimeter
2 X Table Line
1 X Chinese Manual
Reviews
There are no reviews yet.