Additional information
Origin | Mainland China |
---|---|
Feature | Stocked |
Model Number | DQ7 |
Material | Plastic |
Type | Kitchen Lighters |
Certification | CE / EU |
Summer sale for all swim suits – off 50%! Shop Now
67.50 $
46 in stock
Origin | Mainland China |
---|---|
Feature | Stocked |
Model Number | DQ7 |
Material | Plastic |
Type | Kitchen Lighters |
Certification | CE / EU |
1, working voltage: AC220V 2, working voltage range: AC175-245V 3, service life: ≥100,000 times
4, ignition intensity: high-pressure powerful ignition, can ignite flammable gas and vaporized alcohol-based biofuels,
5, the igniter is sealed with epoxy resin, waterproof and moisture-proof.
6, ignition time: power on long ignition, continuous ignition.
Second, the commercial stove igniter – DQ7 lead wire plug connection instructions
1. Two high-voltage ignition wires 800mm are connected to the double-pin ignition needle for relative ignition, or one high-voltage ignition wire 800mm is connected to the ignition needle, and the other high-voltage ignition wire 800mm is connected to the furnace body, the ignition pin and the burner metal. The distance between the two is 5-6mm, and the ignition is discharged for the burner to form an ignition circuit. Ignition high-voltage line connection: The company strongly recommends that the customer use the dual-purpose ignition for the ignition needle. This kind of ignition effect is better. If the double-needle can only be used with a single needle because of the burner, one of the high-voltage output leads 800mm Connect the ceramic ignition needle, another high-voltage output lead 800mm must be fixed on the burner with screws. The distance between the ignition needle and the metal of the burner is 5-6mm. The ignition is discharged against the burner to form an ignition circuit. Note that it is not on the stove, it is not attached to the hob. If it is connected to the hob, the ignition circuit is very long. Moreover, the hob and the burner are not necessarily connected, so the ignition is cut off. In the loop, the igniter only uses half the power. Maybe you can hardly understand the truth at the same time. Maybe you will say that I have been connected in this way. It is very good. You just have to try it. So the igniter output high voltage line produced by our company is double long line. For a length of 800mm, refer to the igniter connection diagram below.
2, the input red high temperature line 500mm connected to 220V mains.
3, in order to facilitate the installation, you can customize the length of the cable plug and the connection terminal according to customer needs. High-voltage line terminal block as shown
Third, commercial stove igniter – DQ7 working process
1. Turn on the 220V power switch and ignite the ignition. At this time, turn on the gas valve of the stove to ignite the combustible gas or alcohol-based fuel and enter the normal combustion state. At this time, the igniter is continuously ignited.
2. If you want to stop the stove work, first close the air valve, then turn off the 220V power switch.
3, the company's commercial stove igniter series products, there are a variety of models for customers to choose, can also be customized according to customer requirements.
Fourth, high frequency high energy igniter installation precautions
1. The installer must have an electrician installation qualification.
2. 2. The rated input voltage of this igniter is 220V 50HZ. A qualified leakage circuit breaker must be installed at the front end of the power supply. The metal casing of the cooker must be protected by a grounding wire. It is strictly forbidden to connect the metal casing with a neutral wire!
3. The control switch on the panel should use a bipolar power switch of not less than 5A/250V, and the igniter power cord is connected to the power switch.
4. 4. The igniter can be fixed or suspended in the lower space of the cooker, and high temperature radiation baking should be avoided.
5, 5. High-voltage line is connected to the ignition needle. It is recommended to use dual-ignition ignition mode. The discharge spacing of the ignition needle is 3-5mm. Try not to use the single-discharge method. If only one high-voltage line is connected to the ignition needle, the other high-voltage line must be reliably connected. On the metal body of the burner, it can not be easily connected to the metal casing of the cooker, which will bring many difficult problems!
6. 6. The length of the high-voltage line is “long enough and shortest”. It is better to separate the two lines by more than 3 cm, and keep a certain degree of drooping arc to facilitate the oil drop. The high-voltage line can not be extended continuously. The wiring is not allowed to be close to the iron frame and iron plate of the stove. Do not add all kinds of casings. Never use the two high-voltage wires to twist together to avoid high-frequency high-voltage leakage!
7. Regularly clean up debris and do not rinse with water.
Five, the main product type of commercial stove igniter
The commercial stove igniter series products produced by our company are divided into powerful igniter, super igniter and high-energy igniter according to the ignition intensity. There are two kinds of delay ignition and continuous ignition according to the ignition mode. Electric start, jog button start and switch start, as well as output control fan start, so the following series of products have been produced, customers can purchase according to needs, or customize products according to customer requirements.
1; Strong ignition: This type of igniter is suitable for igniting flammable gas or vaporized alcohol-based fuel, and can also ignite high-purity liquid alcohol-based fuel.
2; super ignition: This type of igniter can ignite flammable gas and alcohol-based fuel, and the ignition needle can be ignited with a little water. It is especially suitable for point-based alcohol-based fuels, which contain different proportions of water in alcohol-based fuels.
3; high-energy ignition: This type of igniter has the strongest ignition capacity. The spark is like a flame. It can ignite some difficult fuels. It is also suitable for large-scale cooking stoves with fans. Because of the fan, the ignition sparks are scattered. Increasing the ignition area makes it easier to catch fire. Customers can choose according to their needs.
The commercial stove igniter produced by our company mainly has the following functions:
1, continuous ignition; ignition after powering until the power is turned off,
2, delay ignition; ignition after ignition for a certain time will automatically stop ignition, a certain time is generally 10-12 seconds, can also be set according to customer needs. If some customers require a delay ignition time of 20 seconds. The advantage of using such an igniter is that the life of the igniter is greatly extended.
3. The low-voltage jog button switch is activated; the igniter has a set of low-voltage switch start leads connected to the low-pressure push button switch to realize the low-voltage start igniter. This ignition mode is safer, not afraid of leakage and electric shock, and the low-voltage switch starts a little moving and button Self-locking, this is based on the user's habits.
4, synchronous control of the fan; igniter has a set of 220V voltage output leads, can be used to control the fan or electromagnetic pump.
The above functions can be selected according to their own needs. If there are other functions to be implemented, they can be customized.
The main products of the igniter produced by the company are as follows. 1, DQ7: 220V continuous powerful ignition. 2, DQ2: 220V with extended powerful ignition. 3, DQ6: 220V continuous super ignition. 4, DQ3: 220V with time delay super ignition.
5, DQ5: 220V with time delay super ignition, low pressure button start.
6, DQ8: 220V with time delay super ignition, low pressure button start, synchronous control fan or electromagnetic pump. 7, DY3: 220V continuous high-energy ignition. 8, DY1: 220V with delayed high-energy ignition.
9, DY2: 220V with delayed high-energy ignition, low-voltage button to start.
10, DY6: 220V with delayed high-energy ignition, low-pressure button start, synchronous control of the fan or electromagnetic pump.
1. Description of N series atomization controller This series of controllers are used in conjunction with methanol spray burners to complete ignition and firepower adjustment. The ones with extinguishing function can be used in steaming ladle furnaces and other places. System parameter setting method: Long press the setting key to enter the system parameter setting, turn the knob to select the desired menu, then press the setting key to display the value, turn the knob to adjust the value, and then long press the setting key until SAU is displayed, which means the save is successful. Note: If you don't […]
80.53 $ Add to cartZQ1 alcohol based fuel steam controller system description First, the configuration: 220V electromagnetic pump; 220V fan; super ignition; start button compatible switch; wind pressure switch; lower water level probe; ignition needle; fire needle; status indicator. Second, the applicable products: Alcohol based fuel steam generator Third, the work process: When the start button is turned on, the fan runs immediately. When the wind pressure switch is turned on, the ignition starts and the 220V electromagnetic pump is started, and the alcohol-based fuel is sprayed. When the fire detector detects the flame controller, the ignition is stopped, and the system enters the […]
96.25 $ Add to cartFully compatible with the general-purpose OCE-K339L controller, the materials are more sophisticated, the performance is more stable, and the anti-interference is stronger. Upgrade does not increase the price, if our improvement can improve your quality, I DO. 1. Plate upgrade: It adopts Aobolai KB Class A FR4 glass fiber board, which has better electrical performance and higher safety. 2, process upgrade: SMD surface patch technology, double-sided wiring design, automatic production efficiency, more stable performance; buzzer built-in, to avoid collision during transportation and use the housing to expand the sound, the sound is louder. 3, program upgrade: the main control chip […]
115.00 $ Add to cartY2 commercial gas stove flameout safety protection ignition controller function description This controller is used on commercial stoves, can realize automatic high-energy ignition, accidental flameout protection, and meet the automatic control and safety protection of modern kitchen stoves. 1. Basic parameters of Y2 commercial stove flameout safety protection controller 1. Product model: Y2. 2. Operating voltage range: AC175-245V 3. Service life: ≥100,000 times 4. Ignition intensity: high-energy ignition, which can easily ignite combustible gas and various alcohol-based biofuels. 5. There is a safety protection function for accidental flameout. When the flameout is accidentally closed, the solenoid valve will be turned […]
146.25 $ Add to cartGN-787E quick-loading alcohol base material electric heating vaporization controller function description The controller is a moisture-proof structure of the whole plastic shell, and has its own lead-out line, which is used for electric heating and alcohol-free gasification stove without fan, in addition to the functions of conventional heating, temperature measurement, temperature control, ignition output, electromagnetic pump gear output and the like. There is also a model with its own precision fire regulation to choose, which can realize the stepless precision adjustment and start and stop control of the oil pump flow. This function and the gear position adjustment realize the […]
377.50 $ Add to cartFunction description of alcohol-based fuel vaporization controller for precise regulation of firepower The controller is used for electric heating and alcohol-free gasification stove without fan, in addition to the functions of conventional heating, temperature measurement, temperature control, ignition, electromagnetic pump speed regulation, etc., it can also expand external precision regulator to achieve precise adjustment of oil pump flow and Start-stop control, this function and gear position adjustment achieve the effect of no need to switch, fire with heart, start and stop freely. At the same time, it can also extend the external word reset rocker switch or the third gear […]
502.50 $ Add to cartFeatures: OOTDTY brand new and high It can meet almost all your needs for barbecue and barbecue, welding, crafts and pastries. It is definitely an for IDEAL choice for picnics, hiking, camping or other outdoor activities.Easy to operate: just insert the cylinder connector into the gas bottle, press it lightly, and then turn it clockwise until it locks in place. Turn the flame adjustment knob to release the gas and press the ignition button to get a stable flame.High quality: It is made of high-quality stainless steel tube and plastic material, which can withstand high temperatures and is […]
Commercial stove infrared anti-air burning controller function description The controller is a commercial stove controller without fan control the fan can be independently controlled, which can realize automatic high-energy ignition and anti-air burning, and meet the needs of automatic control and safety protection of modern kitchen stoves. Controller working process: The controller turns on the power switch, starts ignition, opens the oil valve, and after 12 seconds, the ignition stops and enters the combustion state. At this time, the infrared sensor head and the receiving head constitute a pot sensor to detect whether there is a pot on the furnace, […]
177.50 $ Add to cart1, working voltage: AC220V 2, working voltage range: AC175-245V 3, service life: ≥100,000 times 4, ignition intensity: high-pressure powerful ignition, can ignite flammable gas and vaporized alcohol-based biofuels, 5, the igniter is sealed with epoxy resin, waterproof and moisture-proof. 6, ignition time: 12 seconds, can also be adjusted according to customer needs. Second, the commercial stove igniter – DQ2 lead wire plug connection instructions 1. Two high-voltage ignition wires 800mm are connected to the double-pin ignition needle for relative ignition, or one high-voltage ignition wire 800mm is connected to the ignition needle, and the other high-voltage ignition wire 800mm is […]
67.50 $ Add to cartInfrared beam debugging: a. The receiving head with a glass window at the side end of the aluminum infrared component has a built-in infrared receiving element and a status indicator. The light is always on to indicate that the correct infrared signal is received, indicating that the infrared light is not blocked, and the direction of emission and reception is basic Normal, in the effective range. On the contrary, the flashing light indicates that no infrared signal is received, indicating that the infrared light is blocked or emitted by the pot, and the receiving direction is not within the effective […]
83.75 $ Add to cartWater-cooled constant temperature electric vaporization controller description The controller adds water cooling thermostat function based on all the control functions and structural advantages of the GN-787E series electric vaporization controller. Combined with water-cooled electric vaporization burner, it can realize constant temperature vaporization, improve work stability and reliability, and is an upgraded product of electric vaporization. The controller is a plastic shell moisture-proof structure, with its own lead-out line, which is used for electric heating and alcohol-free gasification stove without fan. In addition to the functions of conventional heating, temperature measurement, temperature control, ignition output, electromagnetic pump gear output, etc. There […]
440.00 $ Add to cartPush Button Piezo Igniter Type of 1 Out 2 Electrode 200 Degree Resistance Wire Fit for Gas Fireplace Gas Oven Gas Heater lgniter Feature: This push button piezo igniter set can be used in gas stoves/ovens, with an spark ignition with 1m cable, and ignition needle to play an ignition role. This propain igniter push button with wire is easy to install. Keep the ceramic pin around 5 mm to the burner hole or it may not ignite gas, sparking distance: 2-3 mm. The universal push button igniter replacement is a piezoelectric igniter, external material is PP plastic, with […]
Attention 1 x Asia / Tag Size: This is Asian size, which is 2-3 smaller than EU / size If you wear European / American size M, you can choose our size XL or XXL 2 x not sure of your size? Dont worry, tell us your height and weight, we recommend choosing the correct size! 3 x Manual measurement, allow 1-3 cm difference 1 cm = 0.39 inch 4 x Different computers can display different colors even if they display the same color. Please allow a reasonable […]
xlmodel-size-9999 Measurement In CM Size Shoulder Chest Length Sleeve 38 88 70 58 39 92 71 59 40 96 72 60 XL 41 100 73 61 XXL 42 104 74 62 XXXL 43 108 75 63 xlmodel-photo-0000 Photos List coat women Zqlz 2019 Winter Down Jacket Women Coa US $35.13 Winter Denim Coat Women Thick Warm Woo US $44.79 Zqlz Women Winter Hooded Thick Warm Co US $52.7 Zqlz Winter Jacket Women Thick Down Co US $45.23 Women Winter Jacket Outwear 2019 Fashi US $41.88 Zqlz Winter Jacket Women Plus Size Cas US $42.81 Zqlz Winter Jacket […]
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Sed sit amet est massa. Sed enim massa, mattisat libero nec, bibendum ultricies augue.
Proudly powered by Gutenify Store and WordPress.
Chcę coś kupić ale szukam informacji jak zamówić... |
Kupiłem coś ale chcę poznać status zamówienia... |
Odebrałem paczkę ale mam pytanie lub problem... |
Chcę dokonać zwrotu i potrzebuję informacji... |
Droptech Sp. z o.o. droptech.polska@gmail.com |
ul. Łódzka 118, Piotrków Tryb. Sprzedajemy tylko przez internet |
NIP: 7712911090 REGON 386758083 |
Wysyłka bezpośrednio od producenta lub dostawcy |
DARMOWA WYSYŁKA + ubezpiecznie dostawy + śledzenie przesyłki |
CAŁKOWITY ZWROT podczas reklamacji |
Reviews
There are no reviews yet.