Description

Introduction:

Mainly used to measure the ultraviolet radiation power density,

Radiant power per unit area.

Products also can measure the temperature and material against UV transmittance blocking rate.

Easy to use, accurate measurement, reliable quality!

Applications

x Radiation intensity measurement sunlight, ultraviolet light and other UV sources

x Material UV transmittance, blocking and reflectance measurements

x Solar film, glass, cloth and other compartments UV performance test

x Field optics and laboratories, meteorological and agricultural production

Advantages
1. The measurement of large power range
2. Response wide spectral range
3. measure the peak power for remote testing
4. measurable permeability barrier rate

5. with a thermometer, a suitable insulation performance test
6. save 100 groups of test data

Parameters
1. Accuracy: ± 10
2. Measuring range: 1uW / c – 2000W / m
3. Response spectrum: 240-390nm
4. Response Center: 325nm
5. The light window diameter: 10mm
6. Window Size: 48x48mm
7. Product Size: 132x71x29mm
8. Packing Size: 185x115x50mm
9. Product Weight: 120g
10. Power supply: 4 AAA batteries not included

Instructions
button

1. OK button: to confirm and switch machine, press the OK button to boot; press and hold the OK button for 3 seconds off
2. M keys: MODE mode switch and direction keys:

3. R key: REC save data queries and the arrow keys: at
4. S keys: SET settings, and the arrow keys: Left

5. H key: HOLD lock and unlock data and the arrow keys: Right

menu

1. Press the arrow keys to select the desired option and press the OK button to confirm

2. Unit: Select the unit uW / c, mW / c, W / m, default: W / m

3. Mode 1: Select the display only power ° C- P- only temperature P + ° C – power and temperature, default: P + ° C

4. Mode 2: Set the display transmittance or blocking rate, default: transmittance

5. Automatic Shutdown: -3 minutes without operation of automatic shutdown, no – no automatic shutdown, the default: Yes

6. Language: Select a language Chinese Chinese-, English- English, Default: Chinese
7. Quit: Press the OK button to exit the setup